EN
ru Steel powder coatings are used to protect steel products from rust and corrosion while enhancing their appearance.
Richconn offers customized powder coating services for your metal parts that are non-stick, abrasion resistant, corrosion resistant, insulating, lubricating, electrically conductive, magnetically conductive, icing resistant, heat resistant, fouling resistant, damping, reflective, chemical resistant, etc.; and available in a variety of colors to provide you with the powder coating solution that's right for you.
Powder coating is one of the polymer synthetic materials, which is characterized by energy saving, low pollution and high efficiency. Not only can be in high temperature conditions, the use of melting and curing into a hard protective coating, high coating efficiency, and surface coating anti-corrosion performance. Can be widely used in shelves, wheel hubs, metal furniture, machinery parts, electrical instrument cases, safes, air conditioning outdoor surface protection, fitness equipment, highway guardrail and other industries.
Can be used as antistatic coating, low dielectric coefficient, high surface resistance
Coefficient of friction as low as 0.02, once coated, permanent use
0.05 to 0.20 range, depending on surface pressure sliding speed and application
Low surface tension, most materials can be easily cleaned on its surface
Up to 260 °C, even up to 315 °C in intermittent operation
Virtually impervious to any chemical attack
Steel powder coatings are used to protect steel products from rust and corrosion while enhancing their appearance.
Aluminum powder coatings provide protection for parts to enhance their wear resistance, corrosion resistance and appearance.
Zinc powder coating can be used to provide protection against corrosion and is commonly used for surface preparation of metal products.
Copper powder coatings improve the appearance of copper products and provide additional protection.
Magnesium alloys can also be powder coated to improve their corrosion resistance and appearance.
Nickel powder coating is commonly used to provide corrosion resistance and improve the appearance of metal products, as well as provide additional hardness.
Chromium powder coatings are used to increase the corrosion resistance of metal products, improve their appearance and hardness, and are typically used in decorative and fixtures.
Titanium powder coatings are used to increase the corrosion resistance of titanium products, improve their appearance, and enhance their performance.
This alloy is commonly used in some high temperature applications and powder coating can provide additional heat and corrosion resistance.
Tin powder coating is used to provide corrosion resistance to metal products and is commonly used in packaging, food containers and electronic components.
Since its inception in 2008, Richconn has specialized in providing superior powder coating services with 16 years of experience and over 500 customers in 80+ countries. We are constantly improving our technology and service to ensure high quality, environmentally friendly coatings. We are proud of the reputation we have built, not just in terms of volume. Quality, reliability and customer satisfaction are the keys to our success. By continuing to strive for excellence, Richconn will grow together by providing superior powder coating solutions to our customers.
The company relies on the development of science and technology, and continues to provide satisfactory high-tech products as a goal that is always adhered to. Through the introduction of advanced equipment at home and abroad, relying on strong strength, successfully developed and produced wear-resistant, corrosion-resistant, high temperature-resistant, radiation-resistant parts and components products, such as automobiles, machinery, industrial equipment, sheet metal products, etc., which are widely used in the fields of metallurgy, chemical industry, electric power, petroleum, military industry, papermaking and so on. The company can also produce special performance Ni-Cr-B-Si-WC metal alloy powder according to customer demand.
The company has 3800+ square meters of standardized plant and a number of special equipment, including AC-HVAF, DH-1080 thermal spray equipment, KEAO-150KW electromagnetic fusion spray welding induction equipment, Germany Schenck horizontal hard bearing balancing machine (HM40U), era of automatic submerged arc surfacing (MZ-1500), horizontal car (CW61125/5000, CW630 × 5000, CW61638/6000, CW61125/5000, CS6140/1500, CS6140/2000, CW6163B/2000), ram universal milling machine (X5760/2), boring machine (TX-68), surface grinding machine (M7340C), cylindrical grinding machine M1432×1000, large cylindrical grinding machine M1350B×3000, rocker arm drill (Z3050×16A), arc welder 400KW, etc. Total 54 sets of equipment. The annual production capacity is up to 10,000 pieces (sets) of coating products, which are well received by customers.
We have obtained GB/T19001-2016/ISO9001:2015 quality management system certification to ensure that product quality meets international standards. We use a heat source (flame or electricity) to heat metal powder and alloy powder materials and spray them onto processed workpieces, which is a high-tech special process that gives the workpieces excellent properties such as abrasion resistance, corrosion resistance and oxidation resistance. The application of this advanced process allows us to maintain a leading position in the field of coatings, meeting the needs of our customers and providing high-quality coating solutions.
Not only can we provide you with the regular red, green, blue, silver, and white powder coatings, we can do more than that, you can customize any color and effect you want.
